2021 China New Design Toe Jack For Sale - Balance valve – Canete

2021 China New Design Toe Jack For Sale - Balance valve – Canete

Short Description:

Where to Buy

For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

Send Email

Where to Contact

For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

Good quality comes initial; company is foremost; small business is cooperation" is our business philosophy which is frequently observed and pursued by our business for Aluminum Hydraulic Jack, Hydraulic Ramp Pump, Manual Hydraulic Hand Pump, The principle of our company is to provide high-quality products, professional service, and honest communication. Welcome all friends to place trial order for creating a long-term business relationship.

2021 China New Design Toe Jack For Sale - Balance valve – Canete Detail:

Tubular type balance valve

Overlap style balance valve

Product Descriptions

The relationship among opening area, opening pressure and opening pressure difference decide the flow from performer from B to A. It’s decided directly by the inlet flow from performer reverse side in case performer “out of control”.If hose breaks occur between direction valve and balance valve oil mouth A, it has no influence on load down operation.

Product Descriptions

Model		Product Descriptions	Hydraulic principle diagram
Hydraulic throttle ValveV-82V-182V-8F		V-82:To control cylinder speed. Also used as shut-off valve for temporary load holding. NPT3/8” female ports.V-182:Same as V-82, but with NPT1/4” female ports. Also suitable for gauge subbing (also V-82).V-8F:Similar to V-82, but with very fine metering for precise flow control. Not recommended using as a shut-off valve.
Hydraulic Check valveV-17		Ruggedly built to resist shock and operate with low pressure drop. Closes smoothly without pounding. NPT3/8” female ports
Hydraulic check ValveV-42		Can be mounted at the cylinder to hold the load in case of system pressure loss. Normally used with double-acting cylinders where pilot port receives pressure from a Tee-fitting in the cylinder retract line.NPT3/8” female portsPilot pressure ratio 14% (6.5:1)
Manually operated Check ValveV-66,V-66NV*V-66F		V-66,V-66NV：For load holding applications with single or double acting cylinders. Valves allow oil to flow back to tank when cylinder retracts. V-66NV is supplied with Viton seals, nickel-plated.V-66FSimilar to V-66, but with very fine metering capability for precise flow control. V-66F is not designed for load holding.
Pressure Relief ValveV-152V-152NV *		V-152：Limits pressure developed by the pump in hydraulic circuit, thus limiting the force imposed on other components.Valve opens whenever preset pressure is reached.To increase pressure setting, turn handle clockwise. Includes:0.9m return line hose kit;±3% repeatability;55-700 bar adjustment range
Hydraulic check ValveKET-YKF-70	1.Tubular type hydraulic Check Valve2.Plate-type hydraulic Check Valve Overlap style hydraulic Check Valve	Can be mounted at the cylinder to hold the load in case of system pressure loss. Normally used with double-acting cylinders where pilot port receives pressure from a Tee-fitting in the cylinder retract line.NPT3/8” female portsPilot pressure ratio 14% (6.5:1)